Name: pressure sensor core Temperature compensated ceramic piezoresistive sensor core ceramic pressure sensor core
Brand: Optry
SKU: 00106
Rating: 4.1 (103 reviews)

pressure sensor core Temperature compensated ceramic piezoresistive sensor core ceramic pressure sensor core

Features:• Patented circuit and graphic design*• High-performance AL2O3 ceramic base (standard 18mm)•Zero point and full scale

Features:

• Patented circuit and graphic design*

• High-performance AL2O3 ceramic base (standard 18mm)

•Zero point and full scale laser calibration

•Wide temperature compensation -40-140 °C, active temperature compensation, extremely low temperature drift coefficient**

• Long-term stability, up to 0.15% FS/year

•Excellent anti-corrosion and anti-wear performance

Application:

• Process control

• Pneumatic control

•Automobiles, home appliances, etc.

•Instrumentation

Dimensions:

Technical parameter:

project	parameter
size	Φ18mm*6.35mm
Range	2bar-400bar (More than 400bar need to be customized）
Operating Voltage	2-20V
Sensitivity	2-4mV/V （Typical value 3.0mV/V）
Zero output	0±0.2mV/V（Typical value 0±0.1mV/V）
Linearity, delay, repeatability	<=0.15%FS
Response time	<1mS
Operating temperature	-40～125℃
input resistance	10KΩ±3KΩ
Output impedance	10KΩ±3KΩ
Temperature Coefficient	<±0.02%FS/℃（Warm tonic）
stability	<=0.15%FS/year
Safe overload (overvoltage allowed)	2.5 times full scale
Service life	More than 2 million pressure cycles

Wiring definition：

Pin	Electrical definition	Wire color
1 VCC	Power positive（+IN）	Red
2 S-	Negative output（-OUT）	blue
3 GND	Power negative（-IN）	black
4 S+	Positive output（+OUT）	yellow

Precautions for use：

1. When installing the core, the product structure design should fully consider the impact of the installation stress. A nylon washer should be installed on the lead surface of the core to make the core evenly stressed and avoid zero point instability.

2. Before soldering the leads, please preheat the core body to increase the solderability of the solder joints and prevent the solder joints from being heated for a long time to reduce the adhesion of the bonding pads.

3. Do not scratch the paint film. Scratching the blue film will damage the internal circuit, which may cause unstable performance.

4. For detailed parameters, please refer to the specific product specification acknowledgement.

Remarks: *Our product graphics have applied for patent protection.

*All our products adopt the laser on-line warming process except for special indications.

ABOUT US

Optry Tech Co., Ltd. Specializes in the production of optical products. With creative and innovative spirits, we produce the following products: Chrome Mask Blanks, Optics Encoder disk, Grating Ruler, Glass Scale, Calibration Target, Calibration Plate, Resolution Test Plate, optical Reticle Glass , Wafer Glass,Monitor Glass, optical Flat ,optical Lens, Prism,Watch glass, Microscale, Table Glass ,Sillicon wafer glass , Correction Sheet, optical filters and so on ,Since its inception , OptryTech optical always adhere to the principle of "pursuit of quality, honesty and realism”. Except the pursuit of business development, at the same time , we pay much attention to enterprise management and after -sale services. And with good quality and service we have won many clients of home and abroad.

The company adheres to the five-in-one core values of customer service, precision and truth-seeking, honesty and mutual assistance, continuous innovation, and people-oriented. It works diligently in the field of optical and optoelectronic component manufacturing to achieve a win-win situation with customers; it is determined to achieve a win-win situation with customers through efficient management, top-notch technology and equipment, As well as the joint efforts of all employees, we have become China's leading and world-renowned supplier of optical and optoelectronic components. At the same time contribute to the social state.

If there`s anything i can do for you , feel free to contact me ,we are glad to help